
Water Softener Repair, Resin Replacement, and Maintenance
A water softener that is not operating properly may allow hardness minerals and scale to return throughout your home. We provide professional water softener repair, cleaning, maintenance, resin replacement, valve service, and component replacement throughout the Phoenix metropolitan area.
Common warning signs include:
Hard water spots returning on fixtures or glass
Reduced soap lather or changes in how the water feels
Excessive or unusually low salt usage
Standing water or salt buildup in the brine tank
Leaking components or unusual system noises
A softener that no longer regenerates correctly
Our technicians are highly-trained and can inspect your system, identify the cause of the problem, and explain the available repair or maintenance options. Repairing an individual component may make sense when the system is otherwise in good condition. Replacement may offer better long-term value when a softener is older, undersized, inefficient, proprietary, or experiencing multiple failures.

Brine Tank Clean
Removes accumulated salt residue, sediment, and buildup from the brine tank to support proper system operation.
$175.00

Resin Clean Only
Cleans the existing resin bed to help address fouling and restore softening performance when replacement is not yet necessary.
$150.00

Control Valve Repair
Diagnoses and repairs common control-valve problems that can affect regeneration, water flow, and system performance.
Starting at $200.00

Brine Tank Float
Replaces or services the float assembly that helps control water levels inside the brine tank.
Starting at $200.00

Resin Replacement 32k (most systems)
Replaces depleted or damaged resin in many 32,000-grain systems to help restore hardness removal.
$450.00

Resin Replacement 48k (most systems)
Replaces depleted or damaged resin in many 48,000-grain systems to help restore softening capacity and performance.
$550.00

Resin Replacement 64k (most systems)
Replaces depleted or damaged resin in many 64,000-grain systems to help restore hardness removal.
$650.00

Clack WS1 .25 Stack Assembly Replacement Service
Replaces the internal Clack WS1 stack assembly when worn components interfere with valve operation or regeneration.
$356.98

Clack WS1 Stack Assembly Replacement Service
Replaces worn internal valve components to help restore proper flow control and regeneration.
$285.00

Disconnect Softener & Close Loop
Disconnects the existing softener and closes the plumbing loop when the system is being removed from service.
$350.00 (+$50 for haul away up to 64k size system)

3rd Party Single Tank Whole Home System on Existing Loop 1" and smaller
Professional installation of a qualifying customer-supplied single-tank system on an existing compatible loop.
$550.00

3rd Party Two Tank or BB Filter Whole Home System on Existing Loop 1" and Smaller
Professional installation of a qualifying customer-supplied two-tank or Big Blue filtration system on an existing compatible loop.
$650.00
Frequently Asked Questions
How do I know if my water softener needs service?
Common signs include hard water spots returning, reduced soap lather, excessive salt use, unusual noises, leaking components, standing water in the brine tank, or a system that no longer regenerates correctly.
Do you service systems that Complete Water Systems did not install?
Complete Water Systems can evaluate many water softener brands and configurations, including systems installed by another company. Compatibility and available parts may vary.
What is included during a water softener service appointment?
The technician will inspect the system, diagnose the issue, explain the recommended work, and provide applicable pricing before additional repairs are completed.
Should I repair or replace my water softener?
Repair may make sense when the system is properly sized and the problem is limited to a serviceable component. Replacement may be more practical when the system is older, inefficient, proprietary, undersized, or experiencing several problems.
Why has hard water returned even though there is salt in the tank?
Possible causes include depleted or fouled resin, incorrect programming, a salt bridge, a valve problem, restricted water flow, or a regeneration issue. An inspection is needed to identify the cause.
How often should a water softener be inspected?
Inspection frequency depends on the equipment, water usage, and local water conditions. Routine checks can help identify leaks, salt buildup, and performance issues before they become more expensive repairs.

Why Us?
Welcome to our Water Softener Services page where you'll find information about a range of our water softener services that keep your home's water clean, efficient, and hassle-free. From expert installations to routine maintenance and repairs, our team is dedicated to ensuring your system runs at peak performance. Listed are some of the most common services we offer, but if you need something that isn’t mentioned, we’re here to help.
Our goal is to provide customized, high-quality solutions that meet your unique water treatment needs. Let us help you experience the difference of truly soft, clean water! Contact us for a personalized quote.
What Your Neighbors Say About Their Water Transformation
Water Softener Tips, Maintenance & Repair Guides

We've Got You Covered
We proudly serve Arizona with expert water filtration and plumbing services. From every corner of Phoenix and more, we're here to ensure you have clean, safe water whenever you need it.
North Phoenix Area
Anthem
New River
Carefree
Cave Creek
Glendale
Paradise Valley
Peoria
Phoenix
Scottsdale
South Phoenix Area
Avondale
Chandler
Guadalupe
Queen Creek
San Tan Valley
Sun Lakes
Tempe
West Phoenix Area
Buckeye
El Mirage
Goodyear
Litchfield Park
Morristown
Sun City
Sun City West
Surprise
Tolleson
Youngtown
East Phoenix Area
Apache Junction
Fountain Hills
Gilbert
Mesa
Rio Verde
Others with Dispatch Fee
Casa Grande
Dewey-Humboldt
Eloy
Florence
Maricopa
Prescott
Prescott Valley
Sedona
Wickenburg
Gold Canyon
Flagstaff
Payson
Coolidge




