© 2016 - 2019 Complete Water Systems LLC

COMPLETE WATER SYSTEMS,  WATER TREATMENT, REVERSE OSMOSIS SYSTEM, WATER SOFTENERS, FILTRATION, SALT FREE CONDITIONERS, BACTERIA REMOVAL UV SYSTEMS, SALES, SERVICE, MAINTENANCE, PARTS, FILTERS, CLACK, FLECK, AUTOROL, ULTIMA, VORTECH, HYDRONIX, VERTEX, VALVE REPAIR, RESIN REPLACEMENT, CARBON REPLACEMENT, IRRIGATION, WATER HEATER, PLUMBING

Upgraded 5 Stage Reverse Osmosis System with High Efficiency 75 Gallon per day 1 to 1 Ratio Membrane

 

The Hydronix 5 is an under sink Reverse Osmosis filter system optimized to treat city water using the existing water pressure. This model makes up to 75 gallons a day of great tasting water. Includes Pentair GRO-75EN Super High Efficiency 1 to 1 ratio Membrane (36,50,75 GPD) Super High Efficiency means you’re using 1/4 of the water compared to most standard RO units. Encapsulated makes changing the membrane fast with no mess Pentair Water the highest quality standards in the US uses 3/4 less water than a standard membrane

 

Includes:

  • Tank - 4.0 Gallon Plastic Tank, Pre-pressurized with Butyl Bladder R (2.5 gal. water capacity when full)

  • All Filters – Upgraded Membrane

  • Standard Chrome Faucet (upgrades available)

 

Certifications:

  • Product has been tested and certified NSF/ANSI Certified Standard 58

 

Maintenance:                                                                                                        

  • Quick and Easy

  • Filter change every 12 months

  • Membrane every 2 to 3 years

 

Other Features:

  • 5 Stage System (75GPD)

  • Holding Tank 5 to 7 Years

  • 1st Stage Sediment

  • 2nd & 3rd Stage Carbon Filter

  • 4th Stage Membrane

  • 5th Stage Taste & Odor

 

Warranty:

  • 5 Year and applies to original purchaser of the system

  • Covers manufacturer material, workmanship or factory preparation deemed to be defective.

  • Exclusions for membrane filters, O-rings or other components that require regular replacement as a result of ordinary usage. Other warranty requirements: system must be used with potable water from a municipal water supply; water pressure to unit no less than 40 psi and no greater than 80 psi; water supply must have a Chlorine level of 1.0 mg/: (ppm) or less; temperature of water supply greater than 40 F and no more than 100F; water supply pH level between 4 and 8; water supply must be free of iron, manganese or hydrogen sulfide.